Vehicle Dynamics Control OFF switch

Vehicle Dynamics Control OFF switch

Pressing the switch to deactivate the Vehicle Dynamics Control system can facilitate


Pressing the switch to deactivate the Vehicle Dynamics Control system can facilitate the following operations.

● a standing start on a steeply sloping road with a snowy, gravel-covered, or otherwise slippery surface

● extrication of the vehicle when its wheels are stuck in mud or deep snow

When the switch is pressed during engine operation, the Vehicle Dynamics Control OFF indicator light on the combination meter illuminates. The Vehicle Dynamics Control system will be deactivated. When the switch is pressed again to reactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control OFF indicator light turns off.

You should not deactivate the Vehicle Dynamics Control system except under the above-mentioned situations.

CAUTION

The Vehicle Dynamics Control system helps prevent unstable vehicle motion such as skidding using control of the brakes and engine power. Do not turn off the Vehicle Dynamics Control system unless it is absolutely necessary. If you must turn off the Vehicle Dynamics Control system, drive very carefully based on the road surface condition.

NOTE

● When the switch has been pressed to deactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control system automatically reactivates itself the next time the ignition switch is turned to the “LOCK” position and the engine is restarted.

● If the switch is held down for 10 seconds or longer, the indicator light turns off, the Vehicle Dynamics Control system is activated, and the system ignores any further pressing of the switch. To make the switch usable again, turn the ignition switch to the “LOCK” position and restart the engine.

● When the switch is pressed to deactivate the Vehicle Dynamics Control system, the vehicle’s running performance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control system. Do not deactivate the Vehicle Dynamics Control system except when absolutely necessary.

● Even when the Vehicle Dynamics Control system is deactivated, components of the brake control system may still activate. When the brake control system is activated, the Vehicle Dynamics Control operation indicator light illuminates.

See also:

Tire inspection
Check on a daily basis that the tires are free from serious damage, nails, and stones.

Related news

  • Mercedes-Benz E-Class: Opening
  • Kia Sorento: Automatic reversal
  • Nissan Sentra Owners Manual: Operating range
  • Nissan Sentra Service Manual: Seat belt buckle switch signal circuit
  • Nissan Sentra Owners Manual: Vanity mirrors

  • Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch

    Vehicle Dynamics Control OFF switch