Turn off display of fuel consumption indicator
The display of the fuel consumption indicator can be turned off.
To turn off the display of the indicator, turn the ignition switch to the “LOCK” position and press the “+” button adjacent to the information display for approximately 5 seconds. Then, the information display and the clock display will blink for 3 seconds to notify that the display of the fuel consumption has been turned off.
To restore the indicator, once again press the “+” button for approximately 5 seconds.
• The initial display setting of the fuel consumption indicator of your vehicle has been set to operational at the time of shipment from the factory.
• The average fuel consumption is calculated even while the indicator is not displayed.
• Even if you turn off the fuel consumption indicator, the fuel consumption indicator will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement.
Setting Bluetooth® audio
1. Select “BT-A SETUP” by pressing the “MENU” button (type C audio)/Select “BT Audio Setup” by operating the “TUNE/ TRACK/CH” dial (type D audio). 2. Perform the following procedure by operat ...
Tire Identification Number (TIN)
Tire Identification Number (TIN) is marked on the intended outboard sidewall. The TIN is composed of four groups.