Toyota Sienna Service Manual: Stereo Component Amplifier Power Source Circuit
This circuit provides power to the stereo component amplifier.
1 INSPECT STEREO COMPONENT AMPLIFIER
- Disconnect the stereo component amplifier connector.
- Measure the resistance according to the value(s) in the table below.
- Measure the voltage according to the value(s) in the table below.
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. Preparation for winter Use fluids that are appropriate to the prevailing outside temperatures. ...
Center Airbag Sensor Assembly Communication Circuit Malfunction
DTC B1790 Center Airbag Sensor Assembly Communication Circuit Malfunction DESCRIPTION The center airbag sensor assembly communication circuit consists of the occupant classification ECU and the center airbag sensor assembly. DTC B1790 is recorded when a malfunction is detected in the center ...
1. INSPECT SPIDER BEARING (a) Check that the spider bearing moves smoothly by turning the flange. (b) Check for the looseness around the joint by strongly moving the flange in the axial and radial directions. HINT: If necessary, replace the shaft. 2.