Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

REPLACEMENT

HINT: COMPONENTS: SEE PAGE 30-4 Replace the RH side using the same procedures as for the LH side.

1. REMOVE REAR WHEEL

2. SEPARATE SPEED SENSOR REAR LH

(a) Remove the bolt and separate the speed sensor from the axle carrier.

NOTICE:Be careful not to damage the speed sensor.

Prevent foreign matter from adhering to the speed sensor.

3. REMOVE REAR AXLE SHAFT LH NUT

REMOVE REAR AXLE SHAFT LH NUT


(a) Using SST and a hammer, unstake the staked part of the axle hub LH nut.

SST 09930-00010

NOTICE: Loosen the staked part of the nut completely, otherwise the screw of the drive shaft may be damaged.

(b) While applying the brakes, remove the lock axle hub LH nut.

4. SEPARATE REAR DISC BRAKE CALIPER ASSY LH

SEPARATE REAR DISC BRAKE CALIPER ASSY LH


(a) Remove the bolt, and separate the flexible hose from the shock absorber.

(b) Remove the 2 bolts and separate rear disc brake caliper assy.

NOTICE: Use a string or other device to keep the brake caliper from hanging down.

5. REMOVE REAR DISC (SEE PAGE 32-29 )

6. REMOVE REAR AXLE HUB & BEARING ASSY LH

REMOVE REAR AXLE HUB & BEARING ASSY LH


(a) Remove the 4 bolts and the rear axle hub & bearing assy LH.

7. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH

SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH


(a) Using a jack, raise the rear axle carrier sub-assy LH, as shown in the illustration.

SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH


(b) Remove the bolt and nut, and separate the rear suspension arm assy No.1 LH (rear axle carrier side) from the rear axle carrier.

HINT: When removing the bolt, keep the nut from rotating

8. SEPARATE STRUT ROD ASSY REAR

SEPARATE STRUT ROD ASSY REAR


(a) Remove the bolt and nut, and separate the strut rod assy rear (rear axle carrier side) from the rear axle carrier.

HINT: When removing the bolt, keep the nut from rotating.

9. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH

SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH


(a) Remove the bolt and nut, and separate the rear suspension arm assy No.2 LH (rear axle carrier side) from the rear axle carrier.

HINT: When removing the bolt, keep the nut from rotating.

10. REMOVE REAR AXLE CARRIER SUB-ASSY LH

REMOVE REAR AXLE CARRIER SUB-ASSY LH


(a) Remove the 2 bolts and 2 nuts, and the rear axle carrier sub-assy LH from the shock absorber.

11. INSTALL REAR AXLE CARRIER SUB-ASSY LH

INSTALL REAR AXLE CARRIER SUB-ASSY LH


(a) Install the rear axle carrier sub-assy LH with the 2 bolts and nuts.

Torque: 180 NVm (1,840 kgfVcm, 133 ftVlbf)

HINT: Insert the bolt from the rear side of the vehicle and temporarily install the nut to the shock absorber.

12. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH

TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH


(a) Temporarily tighten the rear suspension arm assy No.2 LH with the bolt and nut.

HINT: Insert the bolt from the rear side of the vehicle and lightly tighten the bolt.

13. TEMPORARILY TIGHTEN STRUT ROD ASSY REAR


(a) Temporarily tighten the strut rod assy rear with the bolt and nut.

HINT: Insert the bolt from the inside of the vehicle and lightly tighten the bolt.

14. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH

TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH


(a) Temporarily tighten the rear suspension arm assy No.1 LH with the bolt and nut.

HINT: Insert the bolt from the front side of the vehicle and lightly tighten the bolt.

15. INSTALL REAR AXLE HUB & BEARING ASSY LH

INSTALL REAR AXLE HUB & BEARING ASSY LH


(a) Install the rear axle hub & bearing assy LH with the 4 bolts.

Torque: 75 NVm (765 kgfVcm, 55 ftVlbf)

16. INSPECT BEARING BACKLASH (SEE PAGE 30-3 )

17. INSPECT AXLE HUB DEVIATION (SEE PAGE 30-3 )

18. INSTALL REAR DISC (SEE PAGE 32-29 )

19. INSTALL REAR DISC BRAKE CALIPER ASSY LH

INSTALL REAR DISC BRAKE CALIPER ASSY LH


(a) Install the rear disc brake caliper assy LH with the 2 bolts.

Torque: 78 NVm (800 kgfVcm, 58 ftVlbf) (b) Install the flexible hose with the bolt to the shock absorber.

Torque: 19 NVm (192 kgfVcm, 14 ftVlbf)

20. INSTALL REAR AXLE SHAFT LH NUT

INSTALL REAR AXLE SHAFT LH NUT


(a) Install a new axle shaft LH nut.

Torque: 294 NVm, (3,000 kgfVcm, 217 ftVlbf)

(b) Using a chisel and a hammer, stake the axle shaft LH nut.

21. INSTALL SPEED SENSOR REAR LH

(a) Install the speed sensor with the bolt.

Torque: 8.0 NVm (82 kgfVcm, 71 in.Vlbf)

NOTICE:

  • Be careful not to damage the speed sensor.
  • Prevent foreign matter from adhering to the speed sensor.
  • Do not twist the sensor wire when installing the sensor.

22. INSTALL REAR WHEEL

Torque: 103 NVm (1,050 kgfVcm, 76 ftVlbf)

23. STABILIZE SUSPENSION (SEE PAGE 27-29 )

24. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH (SEE PAGE 27-25 )

25. FULLY TIGHTEN STRUT ROD ASSY REAR (SEE PAGE 27-13 )

26. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH (SEE PAGE 27-18 )

27. INSPECT AND ADJUST REAR WHEEL ALIGNMENT (SEE PAGE 27-5 )

28. CHECK ABS SPEED SENSOR SIGNAL (SEE PAGE 05-765 )

Rear axle LH hub bolt
REPLACEMENT HINT: COMPONENTS:SEE PAGE 30-4 Replace the RH side by the same procedures with the LH side. 1. REMOVE REAR WHEEL 2.

Related news

  • Toyota Sienna Service Manual: Freeze frame data
  • Kia Optima: Jump starting
  • Hyundai Elantra: Seat Track Position Sensor (STPS). Description and Operation
  • Toyota RAV4 Service Manual: Short in can bus lines
  • Front passenger’s seat (if equipped)

  • Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)

    Toyota Highlander Service Manual: Rear axle carrier sub-ASSY LH (4WD)