Toyota Corolla Owners Manual: Windshield wipers and washer
Operating the wiper lever
The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted.
1Intermittent windshield wiper operation
2Low speed windshield wiper operation
3High speed windshield wiper operation
*1: For U.S.A.
*2: For Canada
Wiper intervals can be adjusted when intermittent operation is selected.
5 Increases the intermittent windshield wiper frequency*3 6 Decreases the intermittent windshield wiper frequency*3
*3: The interval adjuster may not be equipped depending on the grade.
7 Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts.
■The windshield wiper and washer can be operated when
►Vehicles without a smart key system The engine switch is in the “ON” position.
►Vehicles with a smart key system The engine switch is in IGNITION ON mode.
■If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.
■Caution regarding the use of washer fluid
When it is cold, do not use the washer fluid until the windshield becomes warm. The fluid may freeze on the windshield and cause low visibility. This may lead to an accident, resulting in death or serious injury.
■When the windshield is dry
Do not use the wipers, as they may damage the windshield.
■When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may overheat.
■When a nozzle becomes blocked
In this case, contact your Toyota dealer.
Do not try to clear it with a pin or other object. The nozzle will be damaged.