Toyota Corolla Owners Manual: Opening the trunk from inside the vehicle
Stabilizer bar front
Replacement Hint: components: 1. Remove front wheel 2. Remove front stabilizer link assy lh Remove the 2 nuts and stabilizer bar link. Hint: if the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud. 3. Remove front stabilizer link assy rh Hint: ...
Replacement 1. Disconnect battery negative terminal 2. Remove glove compartment door assy 3. Remove ecm Remove the 2 clips using a clip remover. Then, open the cover. Disconnect the 4 ecm connectors. remove the wire harness from the wire harness clamp. Remove the 2 ...
1. Drain clutch fluid 2. Remove brake master cylinder sub–assy 3. Remove brake booster assy 4. Disconnect clutch reservoir tube Loosen the clip and disconnect the clutch reservoir tube from the clutch master cylinder assy. Hint: use a container to catch the fluid. 5.